Skip to main content

Choosing the target difference and undertaking and reporting the sample size calculation for a randomised controlled trial – the development of the DELTA2 guidance

A Correction to this article was published on 24 October 2019

This article has been updated

Abstract

Background

A key step in the design of a randomised controlled trial is the estimation of the number of participants needed. The most common approach is to specify a target difference in the primary outcome between the randomised groups and then estimate the corresponding sample size. The sample size is chosen to provide reassurance that the trial will have high statistical power to detect the target difference at the planned statistical significance level. Alternative approaches are also available, though most still require specification of a target difference.

The sample size has many implications for the conduct of the study, as well as incurring scientific and ethical aspects. Despite the critical role of the target difference for the primary outcome in the design of a randomised controlled trial (RCT), the manner in which it is determined has received little attention. This article reports the development of the DELTA2 guidance on the specification and reporting of the target difference for the primary outcome in a sample size calculation for a RCT.

Methods

The DELTA2 (Difference ELicitation in TriAls) project has five components comprising systematic literature reviews of recent methodological developments (stage 1) and existing funder guidance (stage 2), a Delphi study (stage 3), a 2-day consensus meeting bringing together researchers, funders and patient representatives (stage 4), and the preparation and dissemination of a guidance document (stage 5).

Results

The project started in April 2016. The literature search identified 28 articles of methodological developments relevant to a method for specifying a target difference. A Delphi study involving 69 participants, along with a 2-day consensus meeting were conducted. In addition, further engagement sessions were held at two international conferences. The main guidance text was finalised on April 18, 2018, after revision informed by feedback gathered from stages 2 and 3 and from funder representatives.

Discussion

The DELTA2 Delphi study identified a number of areas (such as practical recommendations and examples, greater coverage of different trial designs and statistical approaches) of particular interest amongst stakeholders which new guidance was desired to meet. New relevant references were identified by the review. Such findings influenced the scope, drafting and revision of the guidance. While not all suggestions could be accommodated, it is hoped that the process has led to a more useful and practical document.

Peer Review reports

Background

Deciding upon an appropriate sample size is a key part of designing a randomised controlled trial (RCT) [1]. A sample size calculation is typically carried out. Too small a sample size could result in a difference being overlooked, whilst a sample size which is too large could be a waste of resources and also lead to spurious findings [2].

In the healthcare setting, the majority of RCTs adopt a conventional approach (Neyman–Pearson) to determining the sample size. With this approach, the sample size required for a RCT depends upon the magnitude of difference to be detected (the ‘target difference’) along with the risk of reporting a difference when none exists (type I error) and the risk of reporting no difference when a difference of the specified magnitude does exist (type II error). The sample size is highly dependent upon the magnitude of difference, the target difference or effect size, as it has often somewhat imprecisely been referred to. For example, reducing the target difference by a half, quadruples the sample size in a two-arm parallel-group trial with 1:1 allocation and a continuous outcome, which is assumed to be normally distributed [3].

Until recently [2], little has been published looking at methods to inform the choice of target difference. Initial guidance was prepared for standard (non-adaptive superiority two-arm parallel group) trials to be designed and analysed according to the Neyman–Pearson approach [4]. However, that guidance does not cover trials of different hypotheses (i.e. equivalence/non-inferiority trials), any complex designs (e.g. multi-arm or adaptive trials), or other alternative statistical approaches (such as Bayesian and precision based). It is clear that limitations in the scope and conception (as it was developed primarily for researchers) of the initial DELTA guidance means that it does not fully meet the needs of funders and researchers. The DELTA2 project [5] sought to address this gap. This paper reports on the development of the DELTA2 guidance.

Aim and objectives

The DELTA2 project aimed to update and expand upon the previous DELTA guidance for researchers and funders to assist in the determination and corresponding reporting of the target difference (‘effect size’) when performing a sample size calculation for a RCT.

The specific project objectives were:

  1. 1.

    To review existing guidance provided by funders to researchers and scientific review panel/board members

  2. 2.

    To identify key methodological developments or changes in practice that have emerged since undertaking the comprehensive DELTA review [2, 6] and update the DELTA guidance

  3. 3.

    To determine the scope of guidance that would aid researchers and address funders’ needs

  4. 4.

    To achieve consensus on what structured guidance for choosing the target difference (effect size) should comprise

  5. 5.

    To identify future research needs

To achieve these objectives, a five-stage project was developed [5]. This publication briefly summarises the methods of the project, before proceeding to presenting the findings from stages 1–4, which informed the development of the guidance.

Methods

A summary of the methods used in each stage are given below. The final guidance is available [7] and has been summarised in a companion paper (Cook JA, et al.: DELTA2 guidance on choosing the target difference and undertaking and reporting the sample size calculation for a randomised controlled trial - new guidance, forthcoming). The process of developing the guidance is described below.

Stage 1 and 2. Identifying relevant literature and eliciting expert opinion

Literature search

A systematic review was performed to identify recent publications detailing novel approaches to determining the target difference for a RCT. Publications were identified using a systematic search within the PubMed database for articles published after the DELTA review (January 1, 2011) and March 31, 2016 [2, 6]. The search was restricted to journals where previous relevant methodological work in this area had been published [2, 6], supplemented by other leading journals in epidemiology, health economics, health research methodology, statistics and trials. Full details of the search strategy used can be found in Additional file 1.

In addition to the systematic review of publications, a review of existing online guidance provided by funding schemes and advisory bodies was performed.

Search for guidance

Guidance documents prepared by trial funding and advisory bodies to assist applicants applying for funding for a RCT were inspected for relevant text. Searches were carried out for documents associated with UK trial funding schemes run by the National Institute for Health Research (NIHR), including Efficacy and Mechanism Evaluation (EME), Health Technology Assessment (HTA), the Research for Patient Benefit (RfPB) Programme, Programme Grants for Applied Research (PGfAR), Public Health Research (PHR), Invention for Innovation (i4i), and Health Services and Delivery Research (HSDR), the Medical Research Council (MRC) Developmental Pathway Funding Scheme (DPFS), the Arthritis Research UK, the British Heart Foundation (BHF), Cancer Research UK (CRUK) (phase III clinical trial, new agent, population research), and the Wellcome Trust (Health Challenge Innovation Fund). The UK Health Research Authority's (HRA) documentation was searched. A search of guidance documents provided by the NIHR Research Design Service (RDS) was also performed. Similar searches were performed for leading international funding streams and regulatory agencies (Agency for Healthcare Research and Quality (AHRQ), Canadian Institutes of Health Research (CIHR), European Commission Horizon 2020 (H2020), Food and Drug Administration (FDA), Health Canada, National Health and Medical Research Council (NHMRC), National Institutes of Health (NIH), and Patient-Centered Outcomes Research Institute (PCORI)). Information contained within guidance for applicants applying for trial funding from funders and research advisory bodies regarding the choice of target difference was extracted.

Inclusion and exclusion criteria

The title and abstract of articles identified within the PubMed database search were independently assessed by two reviewers to identify publications worthy of further assessment. The full-text of a publication deemed worthy of further assessment was then analysed by a reviewer and included if considered to report a development not already encompassed within the previous DELTA review [2, 6].

Data extraction

Publications viewed to be of relevance were reviewed by an expert reviewer and aspects of interest noted. Information on undertaking a sample size calculation and the target difference choice was identified within the websites of trial funding and advisory bodies and the content assessed by two reviewers. A third (content expert) member of the team acted as arbiter for all disagreements or where further content expertise was required.

Stage 3. Delphi study

A multi-round Delphi study was conducted with stakeholders known to have an interest in the design of RCTs. Participants were asked about what guidance was needed on specifying the target difference in a RCT sample size calculation. A 2-day consensus meeting and a one-off stakeholder engagement session were embedded within the Delphi study (stage 4; see below for details). Findings from the first Delphi round were considered by the 2-day consensus meeting to aid construction of a draft DELTA2 guidance document. A second-round questionnaire was sent with a hyperlink to the draft guidance document. Views and comments on the draft guidance overall, main body of the document, case studies, appendices and references were requested. Round 1 and 2 questionnaires are available in Additional file 2.

A group of known methods experts, the inclusion of which was informed by the DELTA review and findings from Stage 1, alongside representatives of key trial groups were invited to participate in the Delphi study. Representatives for groups including the UKCRC network of clinical trial units (CTUs), the MRC Hubs for Trials Methodology Research (HTMRs), NIHR/MRC/CRUK funding programme panels, the NIHR statistics group and the NIHR RDS were contacted using publicly available contact information and invited to participate. Participants comprised of one named individual per group (unit, board, MRC HTMR, RDS centre or programme; e.g. the director, chair or senior methodologist). These groups represent UK centres and networks of excellence that undertake high-quality trials research. As of July 1, 2016, there were 48 (fully or provisionally) registered CTUs, 5 MRC HTMRs and the 10 regions in the NIHR RDS in England, and the Research Design and Conduct Service in Wales.

Based upon the premise that a minimum of 30 participants would be required to participate in the Delphi process, and assuming one-third of invitees would agree to participate, it was felt that at least 90 invitations needed to be made. Due to the arbitrary nature of this target, no strict maximum was applied and 162 invitations were made.

Stage 4. Two-day consensus meeting and one-off stakeholder engagement sessions

Two-day consensus meeting

Proposals as to the structure and content of the guidance, put forward as part of the first round Delphi process, in addition to literature developments and current guidance practices were presented to 25 stakeholders in a face-to-face, 2-day meeting. Additionally, a number of participants gave presentations that provided an overview of the use of specific approaches and/or personal experience of working in this area. Stakeholders, selected to cover a range of perspectives, areas of expertise and roles within RCT design, discussed and refined the proposal for the guidance document and reached a consensus on the format of the draft guidance document.

One-off stakeholder engagement sessions

To gain a broader range of opinions, engagement sessions were held at the Society for Clinical Trials (SCT) 37th Annual Meeting on May 17, 2016, Statisticians in the Pharmaceutical Industry (PSI) Conference on May 16, 2017, and on the Joint Statistical Meetings (JSM) Conference on August 1, 2017. Participants were invited to provide views on the scope and structure of the guidance needed and to offer constructive feedback on the draft guidance.

Stage 5. Publication of guidance documentation

The provisional guidance was drafted upon completion of stages 1–4 and circulated amongst the DELTA2 members and Delphi participants for comments. UK Funder representatives will be asked to assess the guidance to ensure the document meets funding panel requirements and allow implementation of changes required for specific forms of publication.

Results

Stage 1. Systematic literature search results

The search identified 1395 potentially relevant reports (Fig. 1). Following the screening of titles and abstracts, 73 publications were full text assessed. Of these, 28 were included in the review as representing a development of one of the previously identified seven broad method types (Table 1 and Additional file 3). Minor developments were identified for the health economic (including cost-utility and value of information), opinion-seeking, pilot/preliminary study and standardised effect size approaches. No new methods were identified. Most developments (n = 17 articles) related to the use of variants of the value of information approach.

Fig. 1
figure 1

Flow diagram

Table 1 Included studies from literature review of methodological development in methods for specifying a target difference

A number of helpful review articles that summarise different methods and variations in application were identified; these covered willingness to pay [8, 9] and value of information [10, 11] health economic based approaches, and estimation of the smallest worthwhile difference formulation of a minimal clinically important difference, which covered anchor, distribution, opinion-seeking and standardised effect size methods [12]. Identified articles on relevant topics (e.g. that address statistical aspects of sample size calculations or an existing method but contain no new development) were considered as potential references in the guidance document irrespective of whether they were included in this review.

Stage 2. Search for existing guidance

A search for guidance documentation on the websites for the 15 trial funding and advisory bodies listed within the Methodology section was performed (Additional file 4). On the majority of websites, trial design guidance emphasised the need for applicants to provide sufficient detail to justify the chosen sample size, often going on to discuss techniques employed to calculate sample size but without providing any details or guidance on how this should be done. In particular, there was little specific guidance provided to assist researchers in specifying the target difference. The use of pilot/preliminary studies and ‘interim data’ was noted with limited further comment.

Stage 3. Delphi study

Invitations to participate in the Delphi study were sent (by email on July 29, 2016) to 58 methods experts along with 104 named representatives of key trial groups (including UKCRC network CTUs, the MRC HTMRs, NIHR/MRC/CRUK funding programme panels, the NIHR statistics group and the NIHR RDS). Of the 162 individuals invited to participate, responses were received from 84 (52%), of whom 78 (48%) accepted the invitation and 6 formally declined to participate. Acceptance of the invitation was allowed up to October 10, 2016 (the last acceptance was received on October 4, 2016).

The round 1 questionnaire was open for completion between August 11 and October 10, 2016. Of the 78 experts and representatives who agreed to participate, 69 (88%) completed the Round 1 questionnaire once invited by email whilst 9 did not complete it. The demographics of those who ultimately participated in the Delphi study are given in Table 2. Participants represented a range of RCT roles, with design, analysis and evaluating funding proposals well represented. The majority of participants (57 of the 69 who completed Round 1; 83%) were primarily affiliated with an academic institution, and the majority of participants were from the UK (55 of the 69 who completed Round 1; 80%). Views on whether specific topics and alternative designs (i.e. not a ‘standard’ two-arm, parallel-group design) should be covered within the guidance are given in Figs. 2 and 3. Delphi participants showed strongest support (≥ 25%) for extensive coverage on alternative research questions and handling multiple primary outcomes. Across most topics there was 50–70% support for proportionate coverage except for mechanistic studies and public and patient perspectives on the choice of the target difference. Regarding alternative study designs, the strongest support for extensive coverage was for adaptive designs, cluster randomised trials and multi-arm trials (all > 25%). Across all designs there was 50–60% support for proportionate coverage.

Table 2 Delphi participants’ demographics
Fig. 2
figure 2

Round 1 Delphi online questionnaire responses. Specific topics to address within target difference estimation guidance

Fig. 3
figure 3

Round 1 Delphi online questionnaire responses. Alternative trial designs to address within target difference estimation guidance

A total of 56 free-text comments were made covering personal views on specific topics, views on framing of research questions, and the audience that should be targeted for the guidance. Comments also included suggestions for additional trial designs to cover, references and case study topics.

The Round 2 questionnaire was open for completion between September 1 and November 12, 2017. Only participants who completed Round 1 were invited to participate in Round 2 in which assessment of draft guidelines was required. Only two rounds were performed to fit with the project timescale and progress. Of the 69 participants invited to participate in Round 2, 38 (55%) completed Round 2. Findings from the Round 2 questionnaire are summarised in Fig. 4. Over 80% either ‘somewhat’ or ‘strongly’ agreed that the guidance was useful overall for the recommendations, case studies and appendices; 21 suggestions for improving the main text were made, 11 regarding the case studies and 9 on the appendices. In Round 2, 62 free-text comments were provided, which again covered a range of suggestions for improving the main text, adding an executive summary, improving the signposting of sections, views on the case studies and appendices, additional references, raising the issue of estimands, and personal views on various topics. Comments made in Round 1 and 2 questionnaires along with feedback from Stage 4 led to a substantial number of changes to the document prior to its finalisation. The most substantive being incorporating an executive summary and increasing the number of case studies.

Fig. 4
figure 4

Round 2 Delphi online questionnaire responses

Stage 4. Two-day meeting and stakeholder engagement

An engagement session was held at SCT in May 2016, where the project was introduced, and views on the scope and broad content of the guidance were invited through audience participation. Following this, a 2-day workshop was held in Oxford on September 27–28, 2016, and involved 25 participants including CTU directors, study investigators, project funder representatives, funding panel members, researchers with experts in sample size methods, senior trial statisticians, and Public and Patient Involvement (PPI) representatives. The workshop included presentations of the findings from the initial two stages of the project, the SCT engagement session and Round 1 of the Delphi study, and focused upon decisions relating to the scope and content of the guidance. An initial structure for the first draft of the guidance was developed in light of the findings from the Round 1 questionnaire available at the time of the meeting. A revised structure was agreed by participants at the workshop. Drafting of individual sections was allocated to individuals. The recommendations on conducting a sample size calculation were initially drafted by JC. The various sections were then developed into the first full draft of the guidance by JC; this was circulated to all of the DELTA2 project group for comment, with the draft revised in light of these. An iterative process of comments and revisions was followed until the final version was agreed.

Subsequently, two further engagement sessions were held at PSI and JSM conferences. At the time of the session, the most current draft of the guidance was made available to participants. Both within and post-meeting feedback highlighted the need to consider the role of estimands and the minimum (statistically) detectable difference in the sample size calculation, leading to revisions in the guidance document. There was broad consensus, though not universal agreement, on the need for such guidance and the main topics it needed to cover from stakeholders across the various meetings and from the Delphi study. Differences of opinion tended to be about which topic needed to be covered and how important it was that they were covered.

Stage 5. Finalisation, adaptation and dissemination

The draft guidance was reviewed by the representatives of the project’s funders (MRC-NIHR Methodology Advisory Group) on October 2, 2017. A number of revisions were made in light of feedback received from the advisory group and further feedback from the authors. The revised text of the main guidance was finalised on February 28, 2018. It was endorsed by the MRC-NIHR Methodology Advisory Group on March 12, 2018, with minor updating of references and the final version produced on April 18, 2017. Engagement with individual funders and funding programmes for the best way to utilise the guidance document and adapt to their needs is ongoing.

Discussion

Overview

The target difference is arguably the key value in a conventional sample size calculation but also the most difficult to choose. The DELTA2 project sought to produce more detailed guidance for researchers and funder representatives to aid researchers in making this choice and funder representatives in assessing the choice made. Building upon the DELTA guidance, a number of aspects were explored through engagement with stakeholders and the findings are summarised in this paper.

Decisions on scope and content

As part of the process, we explored uncertainty about what methods for sample size determination should be covered. In particular, the views on two methods (value of information and standardised effect size-based approaches), which were included in the DELTA guidance, were debated and the inclusion reconsidered. There was general agreement that they should be included again but in particular the distinctive nature of the value of information approach required greater prominence. The need for some consideration of alternative statistical approaches (aside from the specification of the target difference per se) was also relatively strong. This resulted in specific appendices and boxes within the main guidance text covering more common alternative statistical methods and trial designs, and dealing with related aspects such as compliance analyses and missing data.

The need for more practical guidance was raised multiple times in various responses and in the engagement sessions. This led to two main additions in the final guidance document. First, 10 recommendations were made for specifying the target difference and a list of corresponding reporting items was included for when the conventional sample size approach is used. It is hoped that this will go some way to support researchers and funders undertaking and assessing sample size calculations. It is recognised that future adaptation to accommodate other study designs and statistical approaches will be needed. Second, a number of case studies were included, reflecting different trial designs and covering different conditions. Additional case studies could be added over time to provide a more complete coverage of the range of trial designs, statistical approaches and methods for specifying the target difference. Overall, the DELTA2 guidance is more comprehensive than the original DELTA guidance (and also more detailed, with over 25,000 compared to around 4000 words). It covers a much broader range of trials and approaches, with more practical guidance about how to undertake a sample size calculation for a RCT. A number of areas for further research were identified. Addressing these evidence gaps would help inform guidance for less common statistical approaches and trial designs.

Strength and limitations

The main strength of this guidance lies in the extensive preparatory work undertaken in both the DELTA2 project and also the original DELTA work. The multiple avenues for engagement with stakeholders represent another strength, since this provided opportunities to solicit views on relevant topics and feedback on the draft guidance to be expressed by various stakeholders. A variety of methods were used to inform the development of the guidance document, including systematic reviews of the literature, a Delphi study using online questionnaires, engagement sessions with stakeholder groups and a 2-day workshop.

Participants in the various stages of the project were self-selected and may not be fully representative of all stakeholders. In particular, despite several attempts, there was limited involvement of industry statisticians with the exception of the PSI stakeholder meeting, and participants were mostly academic statisticians. Overall, those involved were possibly more methodologically interested than those who did not engage.

Timings of key meetings meant that flexibility was needed in the conduct of the stages and they were not carried out in a sequential manner as originally envisioned. The Delphi study only had 69 participants and had only two rounds, with a substantial drop off between rounds 1 and 2. Unlike other implementations of a Delphi study, a scoring system was not used to rank topics [13], nor was a formalised definition of consensus [14] used, as reflected in the more informal determination of consensus in this application.

The scope of some of the stages was purposely limited due to time and resource constraints. The journals searched for methodological developments were those thought to be most likely to publish new developments. It is possible that other developments have been published in other journals, which would have potentially been missed. Consulted stakeholders were predominantly based in the UK and the engagement sessions were limited in number and dependent upon acceptance of the proposal at the respective stakeholder meetings.

Conclusions

The DELTA2 project identified a number of areas (such as practical recommendations and examples, greater coverage of alternative trial designs and statistical approaches) of particular interest amongst stakeholders, which the new guidance was designed to meet. Such findings influenced both the scope and drafting of the DELTA2 guidance document. Impact can be seen by the substantial changes in the document between the first and final versions. It is hoped that this process has led to a more useful and practical document.

Change history

  • 24 October 2019

    Following publication of the original article [1], we have been notified of a few mistakes:

Abbreviations

AHRQ:

Agency for Healthcare Research and Quality

BHF:

British Heart Foundation

CIHR:

Canadian Institutes of Health Research

CRUK:

Cancer Research UK

CTU:

Clinical trial unit

DELTA:

Difference ELicitation in TriAls

DPFS:

Developmental Pathway Funding Scheme

EME:

Efficacy and Mechanism Evaluation

ENBS:

Expected value of net benefit sampling

FDA:

Food and Drug Administration

HE:

Health economics

HRA:

Health Research Authority

HSDR:

Health Services and Delivery Research

HTA:

Health Technology Assessment

HTMR:

Hubs for Trials Methodology Research

i4i:

Invention for Innovation

ICH:

International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use

IDREC:

Inter-divisional Research Ethics Committee

JSM:

Joint Statistical Meeting

MCID:

Minimal clinically important difference

MID:

Minimal important difference

MRC:

Medical Research Council

MRP:

Methodology Research Programme

NHMRC:

National Health and Medical Research Council

NIH:

National Institutes of Health

NIHR:

National Institute for Health Research

PCORI:

Patient-Centered Outcomes Research Institute

PFA:

PCORI Funding Announcement

PGfAR:

Programme Grants for Applied Research

PHR:

Public Health Research

PPI:

Patients and public involvement

PSI:

Statisticians in the Pharmaceutical Industry

RCT:

Randomised controlled trial

RDS:

Research Design Service

RfPB:

Research for Patient Benefit Programme

SCT:

Society for Clinical Trials

SD:

Standard deviation

UKCRC:

UK Clinical Research Collaboration

VOI:

Value of information

References

  1. Bland JM. The tyranny of power: is there a better way to calculate sample size? BMJ. 2009;339:b3985.

    Article  Google Scholar 

  2. Cook JA, et al. Assessing methods to specify the target difference for a randomised controlled trial: DELTA (Difference ELicitation in TriAls) review. Health Technol Assess. 2014;18(28):v–vi 1–175.

    Article  Google Scholar 

  3. Julious S. Sample sizes for clinical trials. Boca Raton: Chapman and Hall/CRC Press; 2010.

    Google Scholar 

  4. Cook J, et al. Specifying the target difference in the primary outcome for a randomised controlled trial: guidance for researchers. Trials. 2015;16:12.

    Article  Google Scholar 

  5. Cook JA, et al. Choosing the target difference (‘effect size’) for a randomised controlled trial - DELTA2 guidance protocol. Trials. 2017;18(1):271.

    Article  Google Scholar 

  6. Hislop J, et al. Methods for specifying the target difference in a randomised controlled trial: the Difference ELicitation in TriAls (DELTA) systematic review. PLoS Med. 2014;11(5):e1001645.

    Article  Google Scholar 

  7. Cook, J.A., et al. Choosing the target difference and undertaking and reporting the sample size calculation for a randomised controlled trial - DELTA2 guidance for researchers and funder representatives. 2018 https://www.csm.ox.ac.uk/research/methodology-research/delta2/delta2-output. Accessed 20 Aug 2018.

  8. Glick HA. Sample size and power for cost-effectiveness analysis (part 1). Pharmacoeconomics. 2011;29(3):189–98.

    Article  Google Scholar 

  9. Glick HA. Sample size and power for cost-effectiveness analysis (part 2): the effect of maximum willingness to pay. Pharmacoeconomics. 2011;29(4):287–96.

    Article  Google Scholar 

  10. Willan AR. Sample size determination for cost-effectiveness trials. Pharmacoeconomics. 2011;29(11):933–49.

    Article  Google Scholar 

  11. Wilson EC. A practical guide to value of information analysis. Pharmacoeconomics. 2015;33(2):105–21.

    Article  Google Scholar 

  12. Ferreira ML, et al. A critical review of methods used to determine the smallest worthwhile effect of interventions for low back pain. J Clin Epidemiol. 2012;65(3):253–61.

    Article  Google Scholar 

  13. Pezold ML, et al. Defining a research agenda for patient-reported outcomes in surgery: using a Delphi survey of stakeholders. JAMA Surg. 2016;151(10):930–6.

    Article  Google Scholar 

  14. Williamson PR, et al. Developing core outcome sets for clinical trials: issues to consider. Trials. 2012;13:132.

    Article  Google Scholar 

Download references

Acknowledgements

This project was funded by the MRC-NIHR Methodology Research Programme in the UK in response to a commissioned call to lead a workshop on this topic in order to produce guidance. The members of the original DELTA (Difference ELicitation in TriAls)2 group were Professor Jonathan Cook, Professor Doug Altman, Dr Jesse Berlin, Professor Martin Bland, Professor Richard Emsley, Dr Dean Fergusson, Dr Lisa Hampson, Professor Catherine Hewitt, Professor Craig Ramsay, Miss Joanne Rothwell, Dr Robert Smith, Dr William Sones, Professor Luke Vale, Professor Stephen Walters, and Professor Steven Julious.

As part of the process of development of the guidance, a 2-day workshop was held at St Hugh’s College in Oxford on September 27–28, 2016. The workshop participants were Professor Doug Altman, Professor David Armstrong, Professor Deborah Ashby, Professor Martin Bland, Dr Andrew Cook, Professor Jonathan Cook, Dr David Crosby, Professor Richard Emsley, Dr Dean Fergusson, Dr Andrew Grieve, Dr Lisa Hampson, Professor Catherine Hewitt, Professor Steven Julious, Professor Graeme MacLennan, Professor Tim Maughan, Professor Jon Nicholl, Dr José Pinheiro, Professor Craig Ramsay, Miss Joanne Rothwell, Dr Robert Smith, Dr William Sones, Professor Nigel Stallard, Professor Luke Vale, Professor Stephen Walters, and Dr Ed Wilson.

The authors would like to acknowledge and thank the participants in the Delphi study and the one-off engagement sessions with various groups, including the Society for Clinical Trials, PSI and JSM conference session attendees, along with the other workshop participants who kindly provided helpful input and comments on the scope and content of this document. We would also like to thank in particular Dr Robert Smith in his role as a member of the public who provided helpful public perspective and input in the workshop and also development and revision of the guidance document. The authors would like to thank Stefano Vezzoli for in-depth comments which helped to refine this document. Finally, the authors acknowledge the helpful feedback from the MRC Methodology Research Panel (MRP) advisory panel, which commissioned the study and provided feedback on a draft version, and also the peer reviewers of this manuscript.

Funding

Funding for this work was received from the MRC-NIHR UK MRP in response to an open commissioned call for an Effect Size Methodology State-of-the-art Workshop. The Health Services Research Unit, Institute of Applied Health Sciences (University of Aberdeen), is core-funded by the Chief Scientist Office of the Scottish Government Health and Social Care Directorates. The funders had no involvement in study design, collection, analysis and interpretation of data, reporting or the decision to publish.

Copyright

The Corresponding Author has the right to grant on behalf of all authors and does grant on behalf of all authors, a worldwide licence to the Publishers and its licensees in perpetuity, in all forms, formats and media (whether known now or created in the future), to i) publish, reproduce, distribute, display and store the Contribution, ii) translate the Contribution into other languages, create adaptations, reprints, include within collections and create summaries, extracts and/or, abstracts of the Contribution, iii) create any other derivative work(s) based on the Contribution, iv) to exploit all subsidiary rights in the Contribution, v) the inclusion of electronic links from the Contribution to third party material where-ever it may be located; and, vi) licence any third party to do any or all of the above.

Paper’s provenance

This paper summarised the key findings underlying research performed in constructing new guidance produced by the DELTA2. This study was undertaken in response to an open commissioned call for an Effect Size Methodology State-of-the-art Workshop by the MRC-NIHR UK MRP. The authors are all researchers who have been involved in randomised trials of varying types with most involved for 10 plus years. They have varying backgrounds and have worked in a range of clinical areas and on both academic and industry funded studies.

Author information

Authors and Affiliations

Authors

Contributions

JAC and SAJ conceived of the idea and drafted the initial version of the manuscript. JAC and WS performed the search for guidance alongside constructing, inviting participants and contributing to the Delphi study and Workshops. JAC, SAJ, WS, JCR, CRR, LVH, RE, SJW, CH, MB, DAF, JAB, DA and LDV contributed to the development of the guidance and commented on the draft manuscript. All authors have read and approved the final version. The corresponding author attests that all listed authors meet authorship criteria and that no others meeting the criteria have been omitted.

Corresponding author

Correspondence to Jonathan Alistair Cook.

Ethics declarations

Ethics approval and consent to participate

Ethics approval for the Delphi study which is part of the DELTA2 project was sought and received from the University of Oxford’s Medical Sciences Inter-Divisional Research Ethics Committee (IDREC - R46815/RE001). Informed consent was obtained for all participants in the Delphi study.

Competing interests

All authors have completed the Unified Competing Interest form at www.icmje.org/coi_disclosure.pdf (available on request from the corresponding author). JAB is employee of J&J and holds shares in this company. LVH is an employee of Novartis. The authors declare grant funding from the MRC UK and NIHR for this work. All of the other authors have been involved in design and conducting randomised trials through their roles. Most of the authors have also served on a committee which evaluates trial proposals for a funder (including for the MRC and NIHR UK). The authors declare that they have no other financial relationships that might have an interest in the submitted work, and all authors declare they have no other non-financial interests that may be relevant to the submitted work.

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Additional files

Additional file 1:

Search strategy details. (DOCX 13 kb)

Additional file 2:

DELTA2 Delphi Questionnaires. (PDF 176 kb)

Additional file 3:

List of included studies. (DOCX 43 kb)

Additional file 4:

Findings from the review of relevant guidance. (DOCX 26 kb)

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Sones, W., Julious, S.A., Rothwell, J.C. et al. Choosing the target difference and undertaking and reporting the sample size calculation for a randomised controlled trial – the development of the DELTA2 guidance. Trials 19, 542 (2018). https://0-doi-org.brum.beds.ac.uk/10.1186/s13063-018-2887-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://0-doi-org.brum.beds.ac.uk/10.1186/s13063-018-2887-x

Keywords