- Open Access
DELTA2 guidance on choosing the target difference and undertaking and reporting the sample size calculation for a randomised controlled trial
Trials volume 19, Article number: 606 (2018)
A key step in the design of a RCT is the estimation of the number of participants needed in the study. The most common approach is to specify a target difference between the treatments for the primary outcome and then calculate the required sample size. The sample size is chosen to ensure that the trial will have a high probability (adequate statistical power) of detecting a target difference between the treatments should one exist.
The sample size has many implications for the conduct and interpretation of the study. Despite the critical role that the target difference has in the design of a RCT, the way in which it is determined has received little attention. In this article, we summarise the key considerations and messages from new guidance for researchers and funders on specifying the target difference, and undertaking and reporting a RCT sample size calculation. This article on choosing the target difference for a randomised controlled trial (RCT) and undertaking and reporting the sample size calculation has been dual published in the BMJ and BMC Trials journals
The DELTA2 (Difference ELicitation in TriAls) project comprised five major components: systematic literature reviews of recent methodological developments (stage 1) and existing funder guidance (stage 2); a Delphi study (stage 3); a two-day consensus meeting bringing together researchers, funders and patient representatives (stage 4); and the preparation and dissemination of a guidance document (stage 5).
Results and Discussion
The key messages from the DELTA2 guidance on determining the target difference and sample size calculation for a randomised caontrolled trial are presented. Recommendations for the subsequent reporting of the sample size calculation are also provided.
Properly conducted, the RCT is generally considered to be the gold standard for assessing the comparative clinical efficacy and effectiveness of healthcare interventions, as well as providing a key source of data for estimating cost-effectiveness . These trials are routinely used to evaluate a wide range of treatments and have been successfully used in a variety of health and social care settings. Central to the design of a RCT is an a-priori sample size calculation, which ensures the study has a high probability of achieving its pre-specified objectives.
The difference between groups used to calculate a sample size for the trial, the “target difference”, is the magnitude of difference in the outcome of interest that the RCT is designed to reliably detect. Reassurance in this regard is typically confirmed by having a sample size which has a sufficiently high level of statistical power (typically 80 or 90%) for detecting a difference as big as the target difference, while setting the statistical significance at the level planned for the statistical analysis (usually this is the 2-sided 5% level). A comprehensive methodological review conducted by the original DELTA (Difference ELicitation in TriAls) group [2, 3] highlighted the available methods and limitations in current practice. It showed that despite there being many different approaches available, some are used only rarely in practice . The initial DELTA guidance does not fully meet the needs of funders and researchers. The overall aim of the DELTA2 project, commissioned by the UK Medical Research Council (MRC)/National Institute for Health Research (NIHR) Methodology Research Programme (MRP), and described here, was to produce updated guidance for researchers and funders on specifying and reporting the target difference (“effect size”) in the sample size calculation of a RCT. In this article, we summarise the process of developing the new guidance, as well as the relevant considerations, key messages and recommendations for determining and reporting a RCT’s sample size calculation (Tables 1 and 2). This article on choosing the target difference for a randomised controlled trial (RCT) and undertaking and reporting the sample size calculatio has been dak published in tge BMJ and BMC Trials journals.
Development of the DELTA2 guidance
The DELTA2 guidance is the culmination of a five stage process to meet the stated project objectives (see Fig. 1) which included two literature reviews of existing funder guidance and recent methodological literature, a Delphi process to engage with a wider group of stakeholders, a 2 day workshop and finalising the core guidance.
The literature review was conducted between April and December 2016 (searching up to April 2016). The Delphi study had two rounds: one held in 2016 before a two-day workshop in Oxford (September 2016) and another between August and November 2017. The general structure of the guidance was devised at the workshop. It was substantially revised based upon feedback from stakeholders received through the Delphi study. In addition, stakeholder engagement events were held at various meetings throughout the development of the guidance: the Society for Clinical Trials (SCT) meeting, and Statisticians in the Pharmaceutical Industry (PSI) conferences both in May 2017, Joint Statistical Meeting (JSM) in August 2017 and a Royal Statistical Society (RSS) Reading local group meeting in September 2017. These interactive sessions provided feedback on the scope (in 2016) and then draft guidance (in 2017). The core guidance was provisionally finalised in October 2017 and reviewed by the funders’ representatives for comment (MRP advisory group). The guidance was further revised and finalised in February 2018. The full guidance document incorporating case studies and relevant appendices is available here . Further details on the findings of the Delphi study and the wider engagement with stakeholders are reported elsewhere . The guidance and key messages are summarised in the remainder of the paper.
The target difference and sample size calculations in RCTs
The role of the sample size calculation is to determine how many patients are required for the planned analysis of the primary outcome to be informative. It is typically achieved by specifying a target difference for the key (primary) outcome which can be reliably detected and the required sample size calculated. In this summary paper we restrict considerations to the most common trial design looking at a superiority question (one which assumes no difference and looks for a difference), although the full guidance considers equivalence and non-inferiority designs which invert the hypothesis and how the use of the target difference differs for such designs .
The precise research question that the trial is primarily set up to answer will determine what needs to be estimated in the planned primary analysis, this is known formally as the ‘estimand’. A key part of deciding this is choosing the primary outcome, which requires careful consideration. The target difference should be a difference that is appropriate for that estimand [7,8,9,10]. Typically (for superiority trials), an “intention to treat” or treatment policy estimand - that is, according to the randomised groups irrespective of subsequent compliance with the treatment allocation - is used. Other analyses that address different estimands [8, 9, 11] of interest (e.g. those based on the effect upon receipt of treatment and the absence of non-compliance) could also inform the choice of sample size. Different stakeholders can have somewhat differing perspectives on the appropriate target difference . However, a key principle is that the target difference should be one that would be viewed as important by at least one (and preferably more) key stakeholder groups that is, patients, health professionals, regulatory agencies, and healthcare funders. In practice, the target difference is not always formally considered and in many cases appears, at least from trial reports, to be determined upon convenience, the research budget, or some other informal basis . The target difference can be expressed as an absolute difference (e.g., mean difference or difference in proportions) or a relative difference (e.g., hazard or risk ratio), and it is also often referred to, rather imprecisely, as the trial “effect size”.
Statistical calculation of the sample size is far from an exact science . Firstly, investigators typically make assumptions that are a simplification of the anticipated analysis. For example, the impact of adjusting for baseline factors is very difficult to quantify upfront, and even though the analysis is intended to be an adjusted one (such as when randomisation has been stratified or minimised),  the sample size calculation is often conducted based on an unadjusted analysis. Secondly, the calculated sample size can be sensitive to the assumptions made in the calculations such that a small change in one of the assumptions can lead to substantial change in the calculated sample size. Often a simple formula can be used to calculate the required sample size. The formula varies according to the type of outcome, how the target difference is expressed (e.g. a risk ratio versus a difference in proportions), and somewhat implicitly the design of the trial and the planned analysis. Typically, a sample size formula can be used to calculate the required number of observations in the analysis set, which varies depending on the outcome and the intended analysis. In some situations, ensuring the sample size is sufficient for more than one planned analysis may be appropriate.
When deciding upon the sample size for a RCT, it is necessary to balance the risk of incorrectly concluding there is a difference when no actual difference between the treatments exists, with the risk of failing to identify a meaningful treatment difference when the treatments do differ. Under the conventional approach, referred to as the statistical hypothesis testing framework , the probabilities of these two errors are controlled by setting the significance level (Type I error) and statistical power (1 minus Type II error) at appropriate levels (typical values are 2 sided 5% significance and 80% or 90% power respectively). Once these two inputs have been set, the sample size can be determined given the magnitude of the between group difference in the outcome it is desired to detect (the target difference). The calculation (reflecting the intended analysis) is conventionally done on the basis of testing for a difference of any magnitude. As a consequence, it is essential when interpreting the analysis of a trial to consider the uncertainty in the estimate, which is reflected in the confidence interval. A key question of interest is what magnitude of difference can be ruled out. The expected (predicted) width of the confidence interval can be determined for a given target difference and sample size calculation which is a helpful further aid in making an informed choice about this part of a trial’s design . Other statistical and economic approaches to calculating the sample size have been proposed such as precision and Bayesian based approaches, [16, 18,19,20,20] and value of information analysis,  though they are not at present commonly applied .
The required sample size is very sensitive to the target difference. Under the conventional approach, halving the target difference quadruples the sample size for a two arm 1:1 parallel group superiority trial with a continuous outcome . Appropriate sample size formulae vary depending upon the proposed trial design and statistical analysis, although the overall approach is consistent. In more complex scenarios, simulations may be used but the same general principles hold. It is prudent to undertake sensitivity calculations to assess the potential effect of misspecification of key assumptions (such as the control response rate for a binary outcome or the anticipated variance of a continuous outcome).
The sample size calculation and the target difference, if well specified, help provide reassurance that the trial is likely to detect a difference at least as large as the target difference in terms of comparing the primary outcome between treatments. Failure to clarify sufficiently what is important and realistic at the design stage can lead to subsequent sample size revisions, an unnecessarily inconclusive trial due to lack of statistical precision, or to ambiguous interpretation of the findings [24, 25]. When specifying the target difference with a definitive trial in mind, the following guidance should be considered.
Specifying the target difference for a randomised controlled trial
Different statistical approaches can be taken to specify the target difference and calculate the sample size but the general principles are the same. To aid those new to the topic and to encourage better practice and reporting regarding the specification of the target difference for a RCT, a series of recommendations is provided in Tables 1 and 2. Seven broad types of methods can be used to justify the choice of a particular value as the target difference: these are summarised in Table 3.
Broadly speaking, two different approaches can be taken to specify the target difference for a RCT. A difference that is considered to be:
important to one or more stakeholder groups
realistic (plausible), based on either existing evidence, or expert opinion.
A very large literature exists on defining and justifying a (clinically) important difference, particularly for quality of life outcomes [26,27,28]. In a similar manner, discussions of the relevance of estimates from existing studies are also common; there are a number of potential pitfalls to their use, which requires careful consideration of how they should inform the choice of the target difference . It has been argued that a target difference should always be both important and realistic , which would seem particularly apt when designing a definitive (Phase III) superiority RCT. In a sample size calculation for a RCT, the target difference between the treatment groups, strictly relates to a group level difference for the anticipated study population. However, the difference in an outcome that is important to an individual might differ from the corresponding value at the population level. More extensive consideration of the variations in approach is provided elsewhere [3, 30].
Reporting the sample size calculation
The approach taken when determining the sample size and the assumptions made should be clearly specified. This information should include all the inputs and formula or simulation results, so that it is clear what the sample size was based upon. This information is critical for reporting transparency, allows the sample size calculation to be replicated, and clarifies the primary (statistical) aim of the study. Under the conventional approach with a standard (1:1 allocation two arm parallel group superiority) trial design and unadjusted statistical analysis, the core items needed to be stated are the primary outcome, the target difference appropriately specified according to the outcome type, the associated “nuisance” parameter (that is, a parameter that, together with the target difference, uniquely specifies the difference on the original outcome scale—eg, the event rate in the control group for a binary primary outcome), and the statistical significance and power. More complicated designs can have additional inputs that also need considered, like the intra-cluster correlation for a cluster randomised design.
A set of core items should be reported in all key trial documents (grant applications, protocols and main results papers) to ensure reproducibility and plausibility of the sample size calculation. The full list of recommended core items are given in Table 2 which is an update of the previously-proposed list . When the sample size calculation deviates from the conventional approach, whether by research question or statistical framework, the core reporting set may be modified to provide sufficient detail to ensure the sample size calculation is reproducible and the rationale for choosing the target difference is transparent. However, the key principles remain the same. If the sample size is determined based upon a series of simulations, this would need to be described in sufficient detail to enable equivalent level of transparency and assessment. Additional items to give more explanation of the rationale should be provided where space allows (e.g. grant applications and trial protocols). Trial result publications can then reference these documents if sufficient space is not available to provide a full description.
Researchers are faced with a number of difficult decisions when designing a RCT, the most important of which are the choice of trial design, primary outcome and sample size. The latter is largely driven by the choice of the target difference, although other aspects of sample size determination also contribute.
The DELTA2 guidance provides help on specifying a target difference and undertaking and reporting the sample size calculation for a RCT. The guidance was developed in response to a growing recognition from funders, researchers, as well as other key stakeholders (such as patients and the respective clinical communities) of a real need for practical and accessible advice to inform a difficult decision. The new guidance document therefore aims to bridge the gap between the existing (limited) guidance and this growing need.
The key message for researchers is the need to be more explicit about the rationale and justification of the target difference when undertaking and reporting a sample size calculation. Increasing focus is being placed upon the target difference in the clinical interpretation of the trial result, whether statistically significant or not. Therefore the specification and reporting of the target difference, and other aspects of the sample size calculatio, needs to be improved.
British Medical Journal
Difference ELicitation in TriAls
Joint Statistical Meeting
Medical Research Council
Methodology Research Programme
National Institute for Health Research
Statisticians in Pharmaceutical Industry
Randomised Controlled Trial
Royal Statistical Society
Society for Clinical Trials
Altman D, et al. The revised CONSORT statement for reporting randomized trials: explanation and elaboration. Ann Intern Med. 2001;134:663–94.
Cook J, et al. Assessing methods to specify the targeted difference for a randomised controlled trial - DELTA (Difference ELicitation in TriAls) review. Health Technol Assess. 2014;18:28.
Hislop J, et al. Methods for specifying the target difference in a randomised controlled trial: the Difference ELicitation in TriAls (DELTA) systematic review. PLoS Med. 2014;11(5):e1001645.
Cook JA, et al. Use of methods for specifying the target difference in randomised controlled trial sample size calculations: Two surveys of trialists' practice. Clin Trials. 2014;11(3):300–8.
Cook JA, et al. Choosing the target difference and undertaking and reporting the sample size calculation for a randomised controlled trial - DELTA2 guidance for researchers and funder representatives. Available from: https://www.csm.ox.ac.uk/research/methodology-research/delta2/delta2-output. Accessed 18 Oct 2018.
Sones W. et al., Choosing the target difference (“effect size”) for a randomised controlled trial – the development of the DELTA2 guidance Trials. 2018;19:542.
Hollis S, Campbell F. What is meant by intention to treat analysis? Survey of published randomised controlled trials. BMJ. 1999;319(7211):670–4.
Phillips A, et al. Estimands: discussion points from the PSI estimands and sensitivity expert group. Pharm Stat. 2017;16(1):6–11.
Rosenkranz G. Estimands-new statistical principle or the emperor's new clothes? Pharm Stat. 2017;16(1):4–5.
Committee for Human Medicinal Products, ICH E9 (R1) addendum on estimands and Sensitivity Analysis in Clinical Trials to the guideline on statistical principles for clinical trials EMA/CHMP/ICH/436221/2017. 2017. p. 1–23. Available from https://www.ema.europa.eu/documents/scientific-guideline/draft-ich-e9-r1-addendum-estimands-sensitivity-analysis-clinical-trials-guideline-statistical_en.pdf. Accessed 18 Oct 2018.
Akacha M, Bretz F, Ruberg S. Estimands in clinical trials - broadening the perspective. Stat Med. 2017;36(1):5–19.
National Institute for Health Research. Involve. Available from: http://www.invo.org.uk/. Accessed 18 Oct 2018.
Chan KB, et al. How well is the clinical importance of study results reported? An assessment of randomized controlled trials. CMAJ. 2001;165(9):1197–202.
Schulz KF, Grimes DA. Sample size calculations in randomised trials: mandatory and mystical. Lancet. 2005;365(9467):1348–53.
Senn S. Controversies concerning randomization and additivity in clinical trials. Stat Med. 2004;23(24):3729–53.
Spiegelhalter DJ, Abrams KR, Myles JP. Bayesian Approaches to Clinical Trials and Health-Care Evaluation. 1st ed. Chicester: John Wiley & Sons; 2004.
Goodman SN, Berlin JA. The use of predicted confidence intervals when planning experiments and the misuse of power when interpreting results. Ann Intern Med. 1994;121(3):200–6.
Bland JM. The tyranny of power: is there a better way to calculate sample size? BMJ. 2009;339:b3985.
Stallard N, et al. Determination of the optimal sample size for a clinical trial accounting for the population size. Biom J. 2016;59(4):609–25.
Pezeshk H. Bayesian techniques for sample size determination in clinical trials: a short review. Stat Methods Med Res. 2003;12(6):489–504.
Claxton K. The irrelevance of inference: a decision-making approach to the stochastic evaluation of health care technologies. J Health Econ. 1999;18(3):341–64.
Charles P, et al. Reporting of sample size calculation in randomised controlled trials: review. BMJ. 2009;338:b1732.
Julious S. Sample sizes for clinical trials. Boca Raton: Chapman and Hall/CRC Press; 2010.
Hellum C, et al. Surgery with disc prosthesis versus rehabilitation in patients with low back pain and degenerative disc: two year follow-up of randomised study. BMJ. 2011;342:d2786.
White PD, et al. Comparison of adaptive pacing therapy, cognitive behaviour therapy, graded exercise therapy, and specialist medical care for chronic fatigue syndrome (PACE): a randomised trial. Lancet. 2011;377(9768):823–36.
Chinn S. A simple method for converting an odds ratio to effect size for use in meta-analysis. Stat Med. 2000;19:3127–31.
Copay A, et al. Understanding the minimum clinically important difference: a review of concepts and methods. Spine J. 2007;7:541–6.
Wells G, et al. Minimal clinically important differences: Review of methods. J Rheumatol. 2001;28:406–12.
Beaton D, Boers M, Wells G. Many faces of the minimal clinically important difference (MICD): A literature review and directions for future research. Curr Opin Rheumatol. 2002;14:109–14.
Fayers P, et al. Sample size calculation for clinical trials: the impact of clinician beliefs. Br J Cancer. 2000;82:213–9.
Cook J, et al. Specifying the target difference in the primary outcome for a randomised controlled trial: guidance for researchers. Trials. 2015;16:12.
This paper summarised key findings of the new guidance produced by the DELTA2 study, commissioned by the MRC/NIHR MRP, in response to an open commissioned call to conduct a workshop on this topic in order to produce guidance. The authors are all researchers who have been involved in randomised trials of varying types, with most involved for more than 10 years; they have varying backgrounds and have worked in various clinical areas and on both academic and industry funded studies. The members of the original DELTA2 group were:
Professor Jonathan Cook, Professor Doug Altman, Dr. Jesse Berlin, Professor Martin Bland, Professor Richard Emsley, Dr. Dean Fergusson, Dr. Lisa Hampson, Professor Catherine Hewitt, Professor Craig Ramsay, Miss Joanne Rothwell, Dr. Robert Smith, Dr. William Sones, Professor Luke Vale, Professor Stephen Walters, and Professor Steven Julious.
As part of the process of development of the guidance a two day workshop was held in Oxford in September 2016. The workshop participants were:
Professor Doug Altman, Professor David Armstrong, Professor Deborah Ashby, Professor Martin Bland, Dr. Andrew Cook, Professor Jonathan Cook, Dr. David Crosby, Professor Richard Emsley, Dr. Dean Fergusson, Dr. Andrew Grieve, Dr. Lisa Hampson, Professor Catherine Hewitt, Professor Steven Julious, Professor Graeme MacLennan, Professor Tim Maughan, Professor Jon Nicholl, Dr. José Pinheiro, Professor Craig Ramsay, Miss Joanne Rothwell, Dr. William Sones, Professor Nigel Stallard, Professor Luke Vale, Professor Stephen Walters, and Dr. Ed Wilson.
The authors would like to acknowledge and thank the participants in the Delphi study and the one-off engagement sessions with various groups including the SCT, PSI and JSM conference session attendees, along with the other workshop participants who kindly provided helpful input and comments on the scope and content of this document. We would also like to thank in particular Dr. Robert Smith in his role as a member of the public who provided helpful public perspective and input in the workshop and also development and revision of the guidance document. The authors would like to thank Stefano Vezzoli for in-depth comments which helped to refine this document. Finally, the authors acknowledge the helpful feedback from the MRC MRP advisory panel which commissioned the study and provided feedback on a draft version.
Funding for this work was received from the MRC/NIHR MRP in response to an open commissioned call for an Effect Size Methodology State-of-the-art Workshop. The Health Services Research Unit, Institute of Applied Health Sciences (University of Aberdeen), is core-funded by the Chief Scientist Office of the Scottish Government Health and Social Care Directorates. The funders had no involvement in study design, collection, analysis and interpretation of data, reporting or the decision to publish.
Availability of data and materials
The full guidance document is available here . Data from the Delphi study are available from the authors upon request.
Ethics approval and consent to participate
Ethics approval for the Delphi study which is part of the DELTA2 project was sought and received from the University of Oxford’s Medical Sciences Inter-divisional Research Ethics Committee (IDREC - R46815/RE001). Informed consent was obtained for all participants in the Delphi study.
Consent for publication
Consent for publication was not required as no individual person data are reported.
All authors have completed the Unified Competing Interest form at http://www.icmje.org/conflicts-of-interest/ (available on request from the corresponding author). JAB is employee of Johnson & Johnson and holds shares in this company. LVH is an employee of Novartis. The authors declare grant funding from the MRC and NIHR UK for this work. All of the other authors have been involved in design and conducting randomised trials through their roles. The authors declare that they have no other financial relationships that might have an interest in the submitted work; and all authors declare they have no other non-financial interests that may be relevant to the submitted work.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Cook, J.A., Julious, S.A., Sones, W. et al. DELTA2 guidance on choosing the target difference and undertaking and reporting the sample size calculation for a randomised controlled trial. Trials 19, 606 (2018). https://0-doi-org.brum.beds.ac.uk/10.1186/s13063-018-2884-0
- Departmental Target
- Sample Size Calculation
- Delphi Study
- Statistical Hypothesis Testing Framework
- National Institute For Health Research (NIHR)